Reference Guide
Table Of Contents
- Dell EMC OpenManage SNMP Reference Guide Version 10.1.0.0
- Contents
- Introduction
- What is new in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- System Battery Table
- Amperage Probe Table
- Power Unit Group
- Power Supply Table
- Power Usage Table
- Voltage Probe Table
- System Information Group
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Local Response Agent Group
The Local Response Agent Group provides information about various attributes of your system’s local response agent (LRA).
The LRA allows systems managers to predetermine how a system running the server administrator responds to a particular
event type, such as the loss of redundancy in a specific component or the elevation of temperature in a chassis. Systems
managers can configure the LRA to respond to an event type with a specific action. When the condition of the critical
component worsens, the systems manager can escalate the response to make it more obvious to the operator.
For example, when a voltage probe on a monitored machine reaches a warning condition, the systems manager may want to
notify the operator by causing the machine to beep. When the voltage probe reaches failure, the systems manager might want
to have the system that has a failing component send a broadcast message to the management system and power off the
troubled system.
LRA Group Tables
The following management information base (MIB) tables define LRA variable attributes:
● LRA Global Settings Table
● LRA Action Table
LRA Global Settings
The global settings table allows the systems manager to determine what LRA capabilities exist for a specific system
that is running Server Administrator. Some machines may support all or some of the capabilities described in
DellLocalResponseAgentCapabilitiesUnique. The LRA Global Settings Table also defines thermal shutdown capabilities and
settings. In the event that a temperature probe determines the temperature is at or over the failure limit, the systems manager
can set an action to be taken automatically.
Table 1262. LRA Global Settings Table
Name
lRAGlobalSettingsTable
Object ID 1.3.6.1.4.1.674.10892.1.1500.10
Description Defines the LRA Global Settings Table.
Syntax SEQUENCE OF LRAGlobalSettingsTableEntry
Access Not accessible
Table 1263. LRA Global Settings Table Entry
Name
lRAGlobalSettingsTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1
Description Defines the LRA Global Settings Table entry.
Syntax LRAGlobalSettingsTableEntry
Access Not accessible
Index
lRAGlobalchassisIndex
Table 1264. LRA Global Chassis Index
Name
lRAGlobalchassisIndex
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1.1
Description Defines the index (one-based) of this chassis.
Syntax DellObjectRange
Access Read-only
Server Administrator Group 287