Reference Guide
Table Of Contents
- Dell EMC OpenManage SNMP Reference Guide Version 10.1.0.0
- Contents
- Introduction
- What is new in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- System Battery Table
- Amperage Probe Table
- Power Unit Group
- Power Supply Table
- Power Usage Table
- Voltage Probe Table
- System Information Group
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Table 1251. TPM Security Control Setting (continued)
onWithoutPrebootMeasurements (2)
TPM security is On without Pre-boot Measurements.
Table 1252. Parallel Port Control Capabilities
Variable Name: DellParallelPortControlCapabilitiesUnique
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
Setup BIOS parallel port capabilities are unknown.
enableCapable(2)
Setup BIOS can enable the parallel port.
lpt1Capable(4)
Setup BIOS can support parallel port 1.
lpt1andEnableCapable(6)
Setup BIOS has enabled parallel port 1.
lpt2Capable(8)
Setup BIOS can support parallel port 2.
lpt2andEnableCapable(10)
Setup BIOS has enabled parallel port 2.
lpt3Capable(16)
Setup BIOS can support parallel port 3.
lpt3andEnableCapable(18)
Setup BIOS has enabled parallel port 3.
allParallelPortCapable(30)
Setup BIOS can support any of the three parallel ports.
Table 1253. Parallel Port Control Settings
Variable Name: DellParallelPortControlSettingsUnique
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
Parallel port state is unknown.
enabled(2)
Setup BIOS has enabled the parallel port.
lpt1(4)
Setup BIOS supports parallel port 1.
lpt1Enabled(6)
Setup BIOS has enabled parallel port 1.
lpt2(8)
Setup BIOS supports parallel port 2.
lpt2Enabled(10)
Setup BIOS has enabled parallel port 2.
lpt3(16)
Setup BIOS supports parallel port 3.
Table 1254. Parallel Port Control Mode Settings
Variable Name: DellParallelPortControlModeSettingsUnique
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
Parallel port mode is unknown.
atModeEnabled(2)
Setup BIOS has set the parallel port to AT mode.
ps2ModeEnabled(4)
Setup BIOS has set the parallel port to Personal Systems/2
(PS/2) mode.
ecpModeEnabled(8)
Setup BIOS has set the parallel port to Extended Capabilities
Port (ECP) mode.
eppModeEnabled(16)
Setup BIOS has set the parallel port to Enhanced Parallel Port
(EPP) mode.
284 Server Administrator Group