Reference Guide
Table Of Contents
- Dell EMC OpenManage SNMP Reference Guide Version 10.1.0.0
- Contents
- Introduction
- What is new in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- System Battery Table
- Amperage Probe Table
- Power Unit Group
- Power Supply Table
- Power Usage Table
- Voltage Probe Table
- System Information Group
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Table 53. Power Supply Maximum Input Voltage (continued)
Object ID 1.3.6.1.4.1.674.10892.5.4.600.12.1.9
Description This attribute defines the maximum input voltage of the power supply (in Volts).
Syntax Signed32BitRange
Access Read-only
Table 54. Power Supply power Unit Index Reference
Name
powerSupplypowerUnitIndexReference
Object ID 1.3.6.1.4.1.674.10892.5.4.600.12 .1.10
Description This attribute defines the index to the associated power unit if the power supply is part
of a power unit.
Syntax ObjectRange
Access Read-only
Table 55. Power Supply Sensor State
Name
powerSupplySensorState
Object ID 1.3.6.1.4.1.674.10892.5.4.600.12 .1.11
Description This attribute defines the state reported by the power supply sensor. This attribute
supplements the attribute powerSupplyStateSettingsUnique.
Syntax PowerSupplySensorStateFlags
Access Read-only
Table 56. Power Supply Configuration Error Type
Name
powerSupplyConfigurationErrorType
Object ID 1.3.6.1.4.1.674.10892.5.4.600.12 .1.12
Description This attribute defines the type of configuration error reported by the power
supply sensor. When the configurationError bit is on in the value for the attribute
powerSupplySensorState, a value is returned for this attribute; otherwise, a value is not
returned for this attribute.
Syntax PowerSupplyConfigurationErrorTypeEnum
Access Read-only
Table 57. Power Supply Power Monitor Capable
Name
powerSupplyPowerMonitorCapable
Object ID 1.3.6.1.4.1.674.10892.5.4.600.12 .1.13
Description This attribute defines a boolean value that reports whether the power supply is capable
of monitoring power consumption.
Syntax BooleanType
Access Read-only
Table 58. Power Supply Rated Input Wattage
Name
powerSupplyRatedInputWattage
Object ID 1.3.6.1.4.1.674.10892.5.4.600.12 .1.14
Description This attribute defines the rated input wattage of the power supply (in tenths of Watts).
Syntax Signed32BitRange
Introduction 25