Reference Guide
Table Of Contents
- Dell EMC OpenManage SNMP Reference Guide Version 10.1.0.0
- Contents
- Introduction
- What is new in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- System Battery Table
- Amperage Probe Table
- Power Unit Group
- Power Supply Table
- Power Usage Table
- Voltage Probe Table
- System Information Group
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Table 26. Amperage Probe Reading
Name
amperageProbeReading
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.6
Description This attribute defines the reading for an amperage probe of type other
than amperageProbeTypeIsDiscrete. When the value for amperageProbeType is
amperageProbeTypeIsPowerSupplyAmps or amperageProbeTypeIsSystemAmps, the
value returned for this attribute is the power usage that the probe is reading in tenths
of Amps. When the value for amperageProbeType is amperageProbeTypeIsDiscrete, a
value is not returned for this attribute.
Syntax Signed32BitRange
Access Read-only
Table 27. Amperage Probe Type
Name
amperageProbeType
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.7
Description This attribute defines the type of the amperage probe.
Syntax AmperageProbeTypeEnum
Access Read-only
Table 28. Amperage Probe Location Name
Name
amperageProbeLocationName
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.8
Description This attribute defines the location of the amperage probe.
Syntax String64
Access Read-only
Table 29. Amperage Probe Upper Non Recoverable Threshold
Name
amperageProbeUpperNonRecoverableThreshold
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.9
Description This attribute defines the upper non recoverable threshold of the amperage probe. The
value is an integer representing the amperage of the threshold in milliamps.
Syntax Signed32BitRange
Access Read-only
Table 30. Amperage Probe Upper Critical Threshold
Name
amperageProbeUpperCriticalThreshold
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.10
Description This attribute defines the upper critical threshold of the amperage probe. The value is
an integer representing the amperage of the threshold in milliamps.
Syntax Signed32BitRange
Access Read-only
Table 31. Amperage Probe Upper NonCritical Threshold
Name
amperageProbeUpperNonCriticalThreshold
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.11
20 Introduction