Reference Guide

Table Of Contents
Table 3. Server Administrator Instrumentation MIB Sections in This Guide (continued)
Section Topics MIB Group Numbers
12 Port Group defines variables for major port types such as keyboard,
monitor, small computer system interface (SCSI), Universal Serial Bus
(USB), and parallel and serial ports
1000
13 Device Group defines variables for pointing, keyboard, processor,
cache, memory, and personal computer interface devices
1100
14 Slot Group defines variables for the systems slots 1200
15 Memory Group defines variables for the systems physical memory 1300
16 BIOS Setup Control Group defines variables for BIOS functions
such as boot sequence, speakers, Wake on the local area network
(LAN), diskettes, ports, and network interface controllers (NIC)
1400
17 Local Response Agent Group defines variables for global settings
and actions. These variables allow users to predetermine how the
system responds to a particular type of event
1500
18 Cost of Ownership Group defines variables for tracking data on the
systems service contract, lease, repair records, trouble tickets, and so
on
1600
20 Cluster Group defines variables for systems that operate as a
cluster
1800
21 Baseboard Management Controller Group provides information
about the Baseboard Management Controller (BMC) that may be
present in your system. In addition to providing general information
about the BMC, this group provides information about the serial and
local area network (LAN) interfaces of the BMC
1900
26 Traps defines the types of alerts that can be sent to report the
status of critical components
5000
Server Administrator Baseboard Management
Controller, ASF MIB
The Server Administrator BMC MIB (filename DcAsfSrv.mib) provides information about the traps sent by BMC. The Server
Administrator BMC MIB structures its MIB objects that provide related information. The BMC MIB groups are identified by the
SNMP OID 1.3.6.1.4.1.3183.1.1.<MIB group number>. The BMC MIB adheres to ASF 2.0 standard and hence the enterprise ID is
wired for management (3183).
Server Administrator Storage Management MIB
The Server Administrator Storage Management MIB (filename dcstorag.mib) provides storage management data that allows
you to monitor the health of storage resources with SNMP management applications.
The following table describes each Server Administrator Storage Management MIB group and lists the MIB group number
assigned to the MIB group. The Server Administrator Storage Management MIB groups are identified by the SNMP OID
1.3.6.1.4.1.674.<MIB group number> where <MIB group number> is the MIB group number assigned to the MIB group. See the
relevant section for more information about the MIB objects defined in a MIB group.
Table 4. Server Administrator Storage Management MIB Sections in This Guide
Section Topics MIB Group Numbers
23 Storage Management Group consists of definitions for the following
MIB groups:
Storage Management Group
10893
NA
10 Introduction