Release Notes

Issues of Server Administrator on all supported operating systems
The issues are applicable to Server Administrator on all the supported operating systems.
Table 1. Issues of Server Administrator on all supported operating systems
Issue ID Functional area Description Workaround/Resolution
Not
available
The omreport command After installing Server Administrator from
the command prompt, typing an omreport
or omconfig command from the same
prompt can cause an error.
Open a new command prompt
window and type commands.
Not
available
Error on Command Log
page
If the command log page in the Server
Administrator UI displays an error message
indicating that the XML is malformed, you
must clear the command log from the CLI
using the omconfig system cmdlog
action=clear command.
Not available
DF384362 Redundancy Status Redundancy Status displays as Not
Applicable in ESXi even when NICs are
teamed. On VMware ESXi systems, NIC
teaming status may not display up in the
Server Administrator network section. This
is an expected behavior due to the operating
system limitation and has no functional
impact to the system.
Not available
BITS113585 SNMP traps Server Administrator does not log CPU or
CMOS Battery Probe Alerts and does not
send SNMP traps.
To resolve this issue, stop the
USB arbitration service and run the
Inventory Collector. To stop the
USB arbitration service:
1. Run the ps aux|grep usb
command to check if the USB
arbitration service is running.
2. Run the chkconfig
usbarbitrator off
command to prevent the USB
arbitration service from starting
during boot.
3. After the USB arbitrator service
is stopped, reboot the server to
allow the Inventory collector to
run.
DF531509 Blank OMSA password The setup and/or system password
configuration from the Server Administrator
UI or CLI is successful, but the password is
displayed as blank instead of asterisk (*) on
the F2 BIOS page.
Not available
BITS086423 Support link on the
Preferences page
After an upgrade to the current version,
Server Administrator does not retain the
support link information on the Preferences
page
Not available
BITS040184 iDRAC user privileges User in iDRAC user authentication page
showing operator privilege(iDRAC user
privileges) is displayed as Custom in Server
Administrator.
Not available
Not
available
BIOS Setup On clicking the Apply button twice on the
BIOS Setup page, the Server preference
page and SNMP configuration page, the
Not available
5