Release Notes

Table 6. Known issues for Storage Management Service (continued)
Issue ID Functional area Description Workaround/Resolutions
text overflowing to the bottom of the side-by-side blue
text boxes.
Not available Physical disk clear
operation
Physical disk clear operation is not available on PERC 8
and later family of hardware controllers.
Not available
Not available RAID 10 Intelligent
Mirroring
RAID 10 Intelligent Mirroring support is not available on
PERC 9 and later family of hardware controllers.
Not available
Not available Physical disk
properties
Physical disk properties such as Manufacture day,
Manufacture week, and Manufacture year are available
for SAS drives only.
Not available
Not available Creating sliced
span virtual disk is
delayed
Creating many sliced span virtual disks using the spun-
down drives through the command line or UI result may
be delayed.
After creating one sliced span
virtual disk, wait for some time
to create the next sliced span
virtual disk.
Not available Security Key
Identifier
A Security Key Identifier can contain
numerals, lowercase alphabets, uppercase alphabets,
nonalphanumeric characters (except space), or a
combination of any of these.
NOTE: If you have used the special characters ”/”
(forward slash) or “ ‘ ” (single quote) in the
Security Key Identifier, they are displayed as “_”
(underscore) on the Change Security Key page and
Import Secured Foreign Configurations page. This is
applicable only to the Security Key Identifier and not
to the Passphrase.
Not available
Not available Logical Connector If Storage Management displays a path failure message
for a Logical Connector after a reboot, use the
Clear Redundant Path View, provided in the Change
Controller Properties controller task, and restart the
system.
NOTE: Use this command only if you have
intentionally removed the multipath connection
while rebooting the system.
Not available
Not available Virtual disk creation
task
In the VMware ESXi 6.x environment, when you create
a virtual disk using Storage Management, you may see
an error message "The task cannot be completed. The
VD creation task is completed but the operating system
may not be aware of the new VDs." However, the
virtual disk is available for all operations on rebooting
the system.
Not available
Not available Patrol Read Patrol Read is not supported on SSD media. The Patrol
Read feature fails for any controller that has SSD media
on a virtual disk.
Not available
Not available Hot plug of
enclosures
Hot plug of enclosures takes time to enumerate the
enclosure and its components. During this time, there
will be a delay in the response time of tasks, such as
displaying the physical disks on the physical disk page
and in the virtual disk selection page.
Not available
Not available Connecting
enclosures in
multipath
Storage Management does not permit connecting
the first enclosure in single path and attaching the
subsequent enclosures in multipath. All enclosures must
be connected in multipath to enable the multipath view.
Not available
17