Reference Guide

Table Of Contents
Action: Replace the battery if it has been removed. If the contact point between the battery and the
controller is burnt or corroded, you must replace either the battery or the controller, or both. See the
hardware documentation for information on how to safely access, remove, and replace the battery.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: 2188, 2318
Local Response Agent (LRA) Number: 2100
SNMP Trap
Numbers
1153
Event ID 2175
Description The controller battery has been replaced.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
1151
Event ID 2176
Description
The controller battery Learn cycle has started.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: 2177
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
1151
Event ID 2177
Description
The controller battery Learn cycle has completed.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: Alert 2177 is a clear alert for alert 2176.
Related Alert Number: None
Local Response Agent (LRA) Number: None
Storage Management Message Reference 97