Reference Guide

Event ID — 1429
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, is unable to
restore the data that was saved in the previous 'save' operation.
Severity Critical
Cause Remove and reinstall the Non-Volatile Dual In-line Memory Module (NVDIMM) device. If the issue
persists, contact your service provider. For information about removing and reinstalling the NVDIMM,
see the system Owner's Manual on the support site.
Event ID — 1430
Description
An unsupported Non-Volatile Dual In-line Memory Module (NVDIMM) device is of unsupported
configuration and unable to operate as currently configured.
Severity Critical
Cause
Review the memory configuration and make sure the configuration is as per memory rules defined in the
system Owner's Manual on the support site.
Event ID — 1431
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, is not
responding.
Severity Critical
Cause
Remove and reinstall the Non-Volatile Dual In-line Memory Module (NVDIMM) device. If the issue
persists, contact your service provider. For information about removing and reinstalling the NVDIMM,
see the system Owner's Manual on the support site.
Event ID — 1432
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, cannot be
configured to save data during a power loss because of an issue in the NVDIMM.
Severity Critical
Cause
Remove and reinstall the Non-Volatile Dual In-line Memory Module (NVDIMM) device. If the issue
persists, contact your service provider. For information about removing and reinstalling the NVDIMM,
see the system Owner's Manual on the support site.
Event ID — 1433
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) devices are placed in write-protect mode
because the system may not provide sufficient power to save data in case of power loss.
Severity Critical
Cause
TBD
44 Server Management Messages