Reference Guide

System Event Log Messages for IPMI
Systems
The tables in this chapter list the system event log (SEL) messages, their severity, and cause.
NOTE: For corrective actions, see the appropriate documentation.
Topics:
• Temperature Sensor Events
• Voltage Sensor Events
• Fan Sensor Events
• Processor Status Events
• Power Supply Events
• Memory ECC Events
• BMC Watchdog Events
• Memory Events
• Hardware Log Sensor Events
• Drive Events
• Intrusion Events
• BIOS Generated System Events
• POST Code Table
• Operating System Generated System Events
• Cable Interconnect Events
• Battery Events
• Power And Performance Events
• Entity Presence Events
• Miscellaneous Events
Temperature Sensor Events
The temperature sensor event messages help protect critical components by alerting the systems management console when
the temperature rises inside the chassis. These event messages use additional variables, such as sensor location, chassis
location, previous state, and temperature sensor value or state.
Table 5. Temperature Sensor Events
Event Message Severity Cause
<Sensor Name/Location> temperature
sensor detected a failure <Reading>
where <Sensor Name/Location> is
the entity that this sensor is
monitoring. For example, "PROC
Temp" or "Planar Temp." Reading is
specified in degree Celsius. For
example 100 C.
Critical Temperature of the backplane board, system board,
or the carrier in the specified system <Sensor Name/
Location> exceeded the critical threshold.
<Sensor Name/Location> temperature
sensor detected a warning <Reading>.
Warning Temperature of the backplane board, system board,
or the carrier in the specified system <Sensor Name/
Location> exceeded the non-critical threshold.
4
System Event Log Messages for IPMI Systems 193