Reference Guide

Table Of Contents
Cause and Action Cause: The Auto Configuration Behavior feature on the controller identified in the message is changed.
Action: No response action is required.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
751
Event ID 2485
Description
The Auto Configuration Parameters on the controller are changed.
Severity Informational
Cause and Action Cause: The Auto Configuration Parameters on the controller identified in the message are changed.
Action: No response action is required.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
751
Event ID 2486
Description
Unable to discover the physical disk installed on the enclosure <encl id>, slot <slot ID>, because of
incompatibility issues : <Controller FQDD>.
Severity Critical
Cause and Action Cause:
The physical drive identified in message cannot be discovered because of incompatibility issues. Some of
the issues because of which a device cannot be discovered are as follows:
Missing namespace in NSID 1.
No namespace is created.
Logical Block Addressing (LBA) size is not either one of these: 512B or 4K.
When the Protection Information (PI) feature is enabled.
Action: 1) 1)Resolve the issue by using the instructions provided on the interface (for example, HII or
PERC CLI). 2) Else, if a resolution is not suggested by the interface because the interface does not
support, do the following: 2a) Restart the server. 2b) When the company logo is displayed, press F2. 2b)
Click Device Setting > Select the RAID Controller > Main Menu > Hardware Components > Enclosure
Management. 3) If the issue persists, remove the NVMe drive identified in the message, and replace it
with a working drive. If the issue is not resolved, contact your service provider. For more information
about repairing issues in NVMe drives, see the relevant PERC User's Guide available on the support site.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
751
180 Storage Management Message Reference