Reference Guide

Table Of Contents
Event ID 2432
Description The PCIeSSD device was found to be in security locked state. Full initialization has to be done on the
security locked drive to recover the drive in usable state.
Severity Warning
Cause and Action Cause: Last full initialization was stopped for some reason and hence the device is in security locked
state.
Action: Run full initialization to recover the device.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
902
Event ID 2433
Description Physical Device is at %1% of warranted device wear-out limit.
Severity Informational
Cause and Action Cause: User triggered task.
Action: None.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
901
Event ID 2434
Description
Physical Device has reached or exceeded its warranted device wear-out limit.
Severity Warning
Cause and Action Cause: User triggered task.
Action: None.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
903
Event ID 2435
Description
Physical Device is approaching read-only mode.
Severity Informational
Cause and Action Cause: User triggered task.
168 Storage Management Message Reference