Reference Guide

Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
1151
Event ID — 2287
Description Protection policy has been changed.
Severity OK / Normal / Informational
Cause and Action Cause: A new protection policy has been created / existing protection policy has been modified.
Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: 2384
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
101
Event ID — 2288
Description
The patrol read has resumed.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
751
Event ID — 2289
Description
Multi-bit ECC error on controller DIMM.
Severity Critical / Failure / Error
Cause and Action Cause: An error involving multiple bits has been encountered during a read or write operation. The error
correction algorithm recalculates parity data during read and write operations. If an error involves only a
single bit, it may be possible for the error correction algorithm to correct the error and maintain parity
data. An error involving multiple bits, however, usually indicates data loss. In some cases, if the multi-bit
error occurs during a read operation, the data on the disk may be OK. If the multi-bit error occurs during a
write operation, data loss has occurred.
Action: Replace the dual in-line memory module (DIMM). The DIMM is a part of the controller battery
pack. See your hardware documentation for information on replacing the DIMM. You may need to restore
data from backup.
Storage Management Message Reference 129