Reference Guide

Table Of Contents
Cause and Action Cause: There are too many enclosures attached to the controller port. When the enclosure limit is
exceeded, the controller loses contact with all enclosures attached to the port.
Action: Remove the last enclosure. You must remove the enclosure that has been added last and is
causing the enclosure limit to exceed.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: 2211
Local Response Agent (LRA) Number: 2091
SNMP Trap
Numbers
854
Event ID 2192
Description The virtual disk Check Consistency has made corrections and completed.
Severity Informational
Cause and Action Cause: The virtual disk Check Consistency has identified errors and made corrections. For example, the
Check Consistency may have encountered a bad disk block and remapped the disk block to restore data
consistency. This alert is for informational purposes.
Action: None. As a precaution, monitor the alert log for other errors related to this virtual disk. If
problems persist, contact Technical Support.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
1203
Event ID 2193
Description
The virtual disk reconfiguration has resumed.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
1201
Event ID 2194
Description
The virtual disk Read policy has changed.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
102 Storage Management Message Reference