Release Notes

● Single multipath and multiple multipath connection feature for 4-port controllers.
● Array584EMM enclosures.
● Events for NVMe drives having initialization error.
● Non-Dell certified drives connected to software RAID S150 controller and later.
Supported platforms and controllers:
● PowerEdge R750XA: PERC S150, HBA 355i Adp, HBA 355e Adp, PERC H345 Front/Adapter, PERC H745 Front/Adapter,
PERC H755N, PERC H755 Front/Adapter.
● PowerEdge R750: PERC S150, HBA 355i Adp, HBA 355e Adp, PERC H345 Front/Adapter, PERC H745 Front/Adapter,
PERC H755N, PERC H755 Front/Adapter.
● PowerEdge R650: PERC S150, HBA 355i Adp, HBA 355e Adp, PERC H345 Front/Adapter, PERC H745 Front/Adapter,
PERC H755N, PERC H755 Front/Adapter.
● PowerEdge C6520: PERC S150, HBA 355i Adp, PERC H345 Adapter, PERC H745 Adapter.
● PowerEdge MX750c: PERC S150, HBA 330MMZ, HBA 350iMX, PERC H745P MX, and PERC H755 MX.
NOTE: For the list of supported operating systems and Dell servers, see Dell EMC OpenManage Software Support Matrix in
the required version of OpenManage Software at Dell.com/openmanagemanuals.
NOTE: For more information about any features, see Dell EMC OpenManage Server Administrator Online Help.
NOTE: From 9.3.0, the RPM packages have been signed with Dell SHA-512 signature key. If using non interactive or
silent method of installation, to verify the authenticity, you must download the key from the following location: https://
linux.dell.com/repo/hardware/dsu/public_gpg3.key, and then import the key to each host with rpm --import <key
file> before installing or upgrading to the current version of Server Administrator. Once the key is imported, you are not
required to import the key every time while installing, or upgrading to the current version of Server Administrator.
Installation Procedure
For complete installation instructions, see the Dell EMC OpenManage Server Administrator version Installation Guide.
This section provides information to enhance your experience with Server Administrator implementations and environments.
● To install Server Administrator on Windows Server Core operating system, Windows-on-Windows (WOW) mode must be
enabled.
● Port 1311 is the default port for Server Administrator. It is a registered port number of Server Administrator. If another
application is configured to run on port 1311 before Server Administrator is installed, the DSM SA Connection Service does
not start after installation. Before you install Server Administrator, make sure that the port 1311 is not in use.
● Before starting Server Administrator, you must enable the client-side scripting in Internet Explorer.
To do so, perform the following:
1. In Internet Explorer, navigate to the Tools menu.
2. Click Internet Options.
3. Click the Security tab.
4. Select the security zone to which the system running Server Administrator belongs.
NOTE: This option should be set to Trusted sites.
5. Click the Custom Level button.
The Security Setting dialog box is opened.
6. Perform the following in the Security Setting dialog box:
a. In Miscellaneous, select the Allow META REFRESH radio button.
b. In Active Scripting, select the Enable radio button.
c. Under Active scripting, select the Allow scripting of Microsoft web browser controls radio button.
7. Click OK and restart your browser.
● To allow Single Sign-on for Server Administrator, perform the following steps:
1. In Internet Explorer, navigate to Tools.
3