Reference Guide

Event ID — 1405
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is nonrecoverable. The memory module failed because of an irrecoverable error.
Hardware Log Sensor Messages
The hardware logs provide hardware status messages to systems management software. On certain systems, the hardware log is
implemented as a circular queue. When the log becomes full, the oldest status messages are overwritten when new status
messages are logged. On some systems, the log is not circular. On these systems, when the log becomes full, subsequent hardware
status messages are lost. Hardware log sensor messages listed provides status and warning information about the noncircular logs
that may fill up, resulting in lost status messages.
Event ID — 1550
Description
Log monitoring has been disabled
Log type: <Log type>
Severity Warning
Cause A hardware log sensor in the specified system is disabled. The log type information is provided.
Event ID — 1551
Description
Log status is unknown
Log type: <Log type>
Severity Information
Cause A hardware log sensor in the specified system could not obtain a reading. The log type information is
provided.
Event ID — 1552
Description
Log size is no longer near or at capacity
Log type: <Log type>
Severity Information
Cause The hardware log on the specified system is no longer near or at its capacity, usually as the result of clearing
the log. The log type information is provided.
Event ID — 1553
Description
Log size is near capacity
44