Reference Guide

Event ID — 1401
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is unknown. The memory module may not be correctly seated, wrongly configured,
or has failed.
Event ID — 1402
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is normal. The memory device identified in the message has returned to a normal
state.
Event ID — 1403
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Warning
Cause A memory device correction rate exceeded an acceptable value. The memory device status and possible
memory module event cause information is provided.
Event ID — 1404
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Error
Cause A memory device correction rate exceeded an acceptable value, a memory spare bank was activated, or a
multi-bit ECC error occurred. The system continues to function normally (except for a multi-bit error).
Replace the memory module identified in the message during the system’s next scheduled maintenance.
Clear the memory error on multi-bit ECC error. The memory device status and possible memory module
event cause information is provided.
43