Reference Guide

Cause The user has chosen to update the flash basic input/output system (BIOS).
Event ID – 1003
Description
A previously scheduled system BIOS update has been canceled
Severity Information
Cause The user decides to cancel the flash BIOS update, or an error occurs during the flash.
Event ID — 1004
Description
Thermal shutdown protection has been initiated
Severity Error
Cause This message is generated when a system is configured for thermal shutdown due to an error event. If a
temperature sensor reading exceeds the error threshold for which the system is configured, the operating
system shuts down and the system powers off. This event may also be initiated on certain systems when a
fan enclosure is removed from the system for an extended period of time.
Event ID — 1005
Description
SMBIOS data is absent
Severity Error
Cause The system does not contain the required systems management BIOS version 2.2 or higher, or the BIOS is
corrupted.
Event ID — 1006
Description
Automatic System Recovery (ASR) action was performed Action performed was:
<Action>
Date and time of action:<Date and time>
Severity Error
Cause This message is generated when an automatic system recovery action is performed due to a hung operating
system. The action performed and the time of action is provided.
Event ID — 1007
Description
User initiated host system control action Action requested was: <Action>
Severity Information
Cause User requested a host system control action to reboot, power off, or power cycle the system. Alternatively,
the user had indicated protective measures to be initiated in the event of a thermal shutdown.
Event ID — 1008
Description
Systems Management Data Manager Started
Severity Information
Cause Systems Management Data Manager services were started.
26