Reference Guide

Table Of Contents
Description Line
Item
Additional Details: <Additional details for the event>
Explanation Specifies additional details available for the hot plug event, for example: Memory device: DIMM1_A
Serial number: FFFF30B1
Description Line
Item
<Additional power supply status information>
Explanation Specifies information pertaining to the event, for example: Power supply input AC is off,
Power supply POK (power OK) signal is not normal, Power supply is turned
off
Description Line
Item
Chassis intrusion state: <Intrusion state>
Explanation Specifies whether the chassis intrusion state is Open or Closed. For example: Chassis intrusion
state: Open
Description Line
Item
Chassis location: <Name of chassis>
Explanation Specifies name of the chassis that generated the message, for example: Chassis location: Main
System Chassis
Description Line
Item
Configuration error type: <type of configuration error>
Explanation Specifies the type of configuration error that occurred, for example: Configuration error type:
Revision mismatch
Description Line
Item
Current sensor value (in Amps): <Reading>
Explanation Specifies the current sensor value in amps, for example: Current sensor value (in Amps):
7.853
Description Line
Item
Date and time of action: <Date and time>
Explanation Specifies the date and time the action was performed, for example: Date and time of action: Sat
Jun 12 16:20:33 2004
Description Line
Item
Device location: <Location in chassis>
Explanation Specifies the location of the device in the specified chassis, for example: Device location: Memory
Card A
Description Line
Item
Discrete current state: <State>
Explanation Specifies the state of the current sensor, for example: Discrete current state: Good
Description Line
Item
Discrete temperature state: <State>
Explanation Specifies the state of the temperature sensor, for example: Discrete temperature state: Good
22