Dell OpenManage Version 8.4 Port Information Guide November 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents Chapter 1: Introduction................................................................................................................. 4 Server Build and Update Utility Deprecated ................................................................................................................ 4 IT Assistant Deprecated.....................................................................................................................................................
1 Introduction The Dell OpenManage Port Information document helps system administrators and technicians to identify the ports used by the Dell OpenManage systems management software, standard operating system services, and other agent applications.
Accessing support content from the Dell EMC support site Access supporting content related to an array of systems management tools using direct links, going to the Dell EMC support site, or using a search engine. ● Direct links: ○ For Dell EMC Enterprise Systems Management and Dell EMC Remote Enterprise Systems Management—https:// www.dell.com/esmmanuals ○ For Dell EMC Virtualization Solutions—https://www.dell.com/SoftwareManuals ○ For Dell EMC OpenManage—https://www.dell.
● The Dell Remote Access Controller RACADM User's Guide provides information about using the RACADM command-line utility. ● The Dell Remote Access Controller 5 User’s Guide provides complete information about installing and configuring a DRAC 5 controller and using DRAC 5 to remotely access an inoperable system. ● The Dell Update Packages User's Guide provides information about obtaining and using Dell Update Packages as part of your system update strategy.
2 Ports The following tables list the ports used by the Dell OpenManage systems management software, standard operating system services and other agent applications. NOTE: Ports with the correct configuration are necessary to allow Dell OpenManage systems management software to connect to a remote device through firewalls. NOTE: The systems management software version mentioned indicates the minimum version of the product required to use that port. NOTE: CIM ports are dynamic.
Table 1. Supported Protocols and Ports on Management Stations Port Numbe r Protocol Port Type Maximum Encryption Level Direction Usage 25 SMTP TCP None In/Out Optional email alert action 162 SNMP UDP None In Event reception through SNMP 1433 Proprietary TCP None In/Out Optional remote SQL server access 2607 HTTPS TCP 128-bit SSL In/Out Web GUI 1278 HTTP TCP None In/Out To launch OME console over HTTP Managed Nodes Table 2.
Table 2. Supported Protocols and Ports on Managed Nodes Port Number Protocol Port Type Maximum Encryption Level Direction Usage 1433 Proprietary TCP None In/Out Optional remote SQL server access 3389 RDP TCP 128 - bit SSL In/Out Contextual application launch —Remote desktop to Windows terminal services 6389 Proprietary TCP None In/out EMC storage discovery and inventory.
Table 3. Supported Protocols and Ports Port Number Protocols Port Type Maximum Direction Encryption Level Usage Configurable 8081 HTTP TCP Link and Launch to FN-IOA, MXL-IOA No None Out * — When a DHCP client connects to a DHCP server, the source port is 68 and the destination port is 67. When the DHCP server responds to the DHCP client, the source port is 67 and destination port is 68. The CMC acts as a DHCP client.
Table 5.
Table 6. Supported Protocols and Ports Port Number Protocols Port Type Direction Usage Configurable 161 SNMP UDP In/Out SNMP query management No 162 SNMP UDP Out SNMP trap event No 443 HTTPS TCP In/Out Remote Management using Web Server to connect to OpenWSMAN/WinRM) Yes 1311 HTTPS TCP In/Out Server Administrator Web GUI Yes Random Port Number Proprietary TCP In/Out On localhost/127.0.0.1 only.
Table 8. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage 1024-65535 (Dynamically assigned) TCP/UDP 7.x, 8.x None In/Out Monitoring and configuration through WMI DCOM Configurable Dell OpenManage Baseboard Management Utility Table 9. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 623 Telnet TCP 1.
Table 10. Supported Protocols and Ports (continued) Port Number Protoco Port l Type Versio n Maximum Encryption Level Directio Usage n HTTP 1.x – 2.0.3 None In/Out Configurable 1433, 2500 80 135, 137, 139, 445 135 TCP TCP/UD P RPC/ DCOM 138 Application launch — PowerConnect No Console Non-HTTP communications (for example, client package download using UNC) TCP/UD 1.x – P 2.0.3 None In/Out UDP WMI/CIM management queries No NS client installation 161 SNMP UDP 1.x – 2.0.
Table 10. Supported Protocols and Ports Port Number Protoco Port l Type Versio n Maximum Encryption Level Directio Usage n Configurable 6389 Propriet ary 1.x – 2.0.
Table 12. Supported Protocols and Ports on Managed Nodes Port Number Protocol Port Type Maximum Encryption Level Direction Usage 161 SNMP Agent UDP 56-bit DES In/Out SNMP query management 443 WSMAN TCP 256-bit AES In/Out Chassis communication 623 RMCP/RMCP+ UDP 128-bit AES In/Out IPMI access over LAN Dell Lifecycle Controller Integration for System Center Configuration Manager Table 13.
Table 15.
Table 18. Management Station Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 8543 HTTP TCP None Out DCLM Communication No 8544 HTTP TCP None Out DCLM Web Server Console Launch No NOTE: Other ports to be accessed or opened as perhttps://technet.microsoft.com/en-in/library/ jj656649.aspx#BKMK_Firewall Table 19.
Dell OpenManage Connection for IBM Tivoli Network Manager Table 22. Management Station Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP None In Event reception through SNMP No Table 23.
Dell OpenManage Plug-in for Nagios Table 26. Management Station Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP In Event reception through SNMP No None Table 27.
Table 29. Supported Protocols and Ports — Ports iDRAC Listens for Connections Port Number Protocols Configurable 5901 Virtual Network Computing (VNC) Yes Table 30.
Table 32. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configura ble 22 Secure Shell (SSH) TCP 1.30 128-bit SSL In/Out Secure CLI management Yes 23 Telnet TCP 1.0 None In/Out Optional Telnetbased CLI management Yes 25 SMTP TCP 1.0 None In/Out Optional e-mail alert No messages 53 DNS UDP 1.0 None In/Out Dynamic DNS registration of host name assigned within DRAC No 68 DHCPassigned IP address UDP 1.
Table 33. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 22 SSH TCP 1.30 128-bit SSL In/Out Secure CLI management Yes 23 Telnet TCP 1.0 None In/Out Optional Telnet-based CLI management Yes 25 SMTP TCP 1.0 None In/Out Optional email alert messages No 53 DNS UDP 1.0 None In/Out Dynamic DNS No registration of host name assigned within DRAC 68 DHCPassigned IP address UDP 1.
Dell Remote Access Configuration Tool (DRACT) Table 34. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 443 TCP 1.0 128-bit SSL In/Out Web management GUI and remote racadm CLI utility No Configurable HTTPS Digital KVM Table 35. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage 2068 Proprietary TCP 1.
