Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PR13
Message Firmware mismatch detected. Configuration changes not applied.
Detailed
Description
The Part Replacement feature detected a firmware difference and cannot apply the
configuration changes. After the device firmware is updated, configuration changes
can be applied.
Recommended
Response Action
No response action is required.
Category Configuration (PR = Part Exchange)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PR14
Message The configuration could not be applied to device: arg1
Arguments arg1 = device name
Detailed
Description
The device identified in the message could not apply the configuration settings.
This may indicate configuration changes since the last system inventory.
Recommended
Response Action
Check the current system configuration and retry the operation.
Category Configuration (PR = Part Exchange)
991