Reference Guide

Table Of Contents
Recommended
Response Action
Replace the target disk. If a rebuild does not automatically start after replacing the
disk, then initiate the Rebuild task. You may need to assign the new disk as a hot
spare to initiate the rebuild.
Category Storage (PDR = Physical Disk)
Severity Severity 1 (Critical)
Trap/EventID 4345
OMSA Event ID 2348
OMSA Trap ID 90400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC * *
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC *
CMC *
PDR63
Message A bad disk block on arg1 cannot be reassigned during a write operation.
Arguments arg1 = physical disk
Detailed
Description
A write operation cannot complete because the disk contains bad disk blocks that
could not be reassigned. Data loss may have occurred. Data redundancy may be
lost.
Recommended
Response Action
Replace the disk.
Category Storage (PDR = Physical Disk)
Severity Severity 1 (Critical)
Trap/EventID 4345
OMSA Event ID 2349
OMSA Trap ID 90400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC * *
961