Reference Guide

PCI5007
Message The auxiliary power-related issue of the PCIe adapter in slot arg1 is resolved.
Arguments arg1 = slot number
Detailed
Description
The 3.3 Volt Regulator power related issue of PCIe carrier present in the slot
identified in the message is resolved.
Recommended
Response Action
No response action is required.
Category System Health (PCI = PCI Device)
Severity Severity 3 (Informational)
Trap/EventID 2419
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔* ✔*
PCI5008
Message The Chassis Management Controller (CMC) is unable to communicate with the
PCIe switch board.
Detailed
Description
The Chassis Management Controller (CMC) could not successfully connect to the
PCIe switch board.
Recommended
Response Action
Do the following: 1) Perform an AC Power Cycle operation on the Chassis by
disconnecting the chassis from AC power, waiting for 30 seconds, and then
reconnecting AC power. 2) Power on at least one server. Using the Chassis
Management Controller (CMC) web interface, select Server Overview->Power-
>Control and then click the Operation field and select the Power On Server
operation. If the issue persists, contact your service provider.
Category System Health (PCI = PCI Device)
Severity Severity 1 (Critical)
Trap/EventID 2417
887