Reference Guide

Detailed
Description
Remote File Share (RFS) is currently configured to be in auto-attach mode. For Web
services to attach an ISO, RFS should be changed to attach mode.
Recommended
Response Action
Change the Remote File Share (RFS) mode to Attach using iDRAC GUI or Remote
Services API and retry.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD58
Message Unable to connect an ISO using Remote File Share (RFS).
Detailed
Description
The connect ISO operation using Remote File Share (RFS) did not complete
successfully.
Recommended
Response Action
Verify all the parameters are correct. If the problem persists. then reset iDRAC and
retry the operation.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD59
Message Unable to disconnect from ISO using Remote File Share (RFS).
Detailed
Description
Disconnecting ISO using Remote File Share (RFS) operation did not complete
successfully.
Recommended
Response Action
Reset iDRAC and retry the operation.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD6
Message Cannot allocate memory.
Detailed
Description
Unable to dynamically allocate memory to perform the task.
Recommended
Response Action
Reset iDRAC and run the command.
Category Configuration (OSD = OS Deployment)
840