Reference Guide

OSD36
Message Boot to ISO Image has been cancelled by using CTRL+E option on the server.
Detailed
Description
User has cancelled system services by using the CTRL+E option (iDRAC
configuration utility) during POST. This action cancels the WSMAN request to boot
to ISO.
Recommended
Response Action
To resolve the issue rerun the command. Do not cancel system services using
CTRL+E during POST when system is rebooting to the ISO.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD37
Message ISO image size too large.
Detailed
Description
ISO Image size is bigger than the available size in VFlash.
Recommended
Response Action
1) Use a smaller size ISO Image. 2) Format the VFlash using the iDRAC GUI,
RACADM, or iDRAC configuration utility and then retry this command.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD38
Message Copying the ISO image from the network failed.
Detailed
Description
There was an error while copying the ISO from the network share.
Recommended
Response Action
1) Make sure the network connection is functional. 2) Make sure the Dell VFlash
doesnt have hardware issues by accessing it through the iDRAC GUI.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD39
Message Unable to find the VFlash.
833