Reference Guide

Category Configuration (OSD = OS Deployment)
Severity Severity 3 (Informational)
No alerts are applicable for this message
OSD33
Message Installed BIOS version does not support this method.
Detailed
Description
The system has an older version of BIOS that does not support this method. Install
the latest version of BIOS to use this method.
Recommended
Response Action
Update the BIOS to version 1.2 or later and then rerun the command.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD34
Message Unable to continue with BootToPXE - ISO image is attached to the system.
Detailed
Description
Unable to continue with BootToPXE command because the system has an ISO
image attached. Detach the ISO image before continuing with BootToPXE.
Recommended
Response Action
Run the DetachISOImage command and then run BootToPXE.
Category Configuration (OSD = OS Deployment)
Severity Severity 3 (Informational)
No alerts are applicable for this message
OSD35
Message Lifecycle Controller is not enabled.
Detailed
Description
Lifecycle Controller is disabled on the system, so none of the remote operating
system deployment commands will work. Make sure Lifecycle Controller is enabled
before running any command.
Recommended
Response Action
Reboot the system and enable System Services by pressing CTRL+E option when
prompted to do so in the POST. This launches the iDRAC configuration utility
where Lifecycle Controller can be enabled.
Category Configuration (OSD = OS Deployment)
Severity Severity 3 (Informational)
No alerts are applicable for this message
832