Reference Guide

Detailed
Description
The old BIOS password used to change the password is incorrect.
Recommended
Response Action
Enter the correct old password for the BIOS and retry the operation.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC022
Message Unable to set the BIOS password because of a jumper setting on the motherboard.
Detailed
Description
The current BIOS password jumper setting prevents the BIOS password from being
changed.
Recommended
Response Action
Change the jumper setting to enable setting the BIOS password.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC023
Message Cannot perform the operation due to an unknown error in iDRAC.
Detailed
Description
The operation did not complete successfully because of an unknown error in
iDRAC.
Recommended
Response Action
Retry the action. If the issue persists, reset the iDRAC.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC024
Message The set operation did not complete successfully as the attribute is read-only.
Detailed
Description
The attribute specified in the operation is currently read only and the value cannot
be modified.
Recommended
Response Action
For more information on the attribute, see Lifecycle Controller-Remote Services
documentation.
Category Configuration (NIC = NIC Config)
814