Reference Guide

Recommended
Response Action
If the firmware has been rolled back to a previous version, this error may occur. All
previously installed licenses must be re-imported. If this is not the case, contact
technical support.
Category Audit (LIC = Licensing)
Severity Severity 1 (Critical)
No alerts are applicable for this message
LIC003
Message License Manager was unable to create and/or allocate the required resources.
Detailed
Description
System resources may be unavailable at the time command is issued.
Recommended
Response Action
Re-issue the command. If the issue persists, contact technical support. Refer to
your product documentation to choose the contact method that is convenient for
you.
Category Audit (LIC = Licensing)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LIC004
Message An internal system error has occurred.
Detailed
Description
This error condition is reported when one of the following conditions occur: 1)
Operating system detected a file error (for example, bad CRC, bad sector) when
reading/writing a license manager file. The error could indicate bad or corrupt
FLASH device. 2) License Manager detected an internal memory data corruption. 3)
The command or command parameters passed to License Manager is invalid. This
is an internal error showing memory corruption. Under normal circumstances this
error should not occur. 4) When exporting a license file, License Manager was
unable to allocate the temporary space required for the transfer of the file.
Recommended
Response Action
Contact technical support. Refer to your product documentation to choose the
contact method that is convenient for you.
Category Audit (LIC = Licensing)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LIC005
Message Import failed: The maximum number of licenses are installed.
724