Reference Guide

Arguments arg1 = max parameter length, arg2 = parameter name
Detailed
Description
The maximum number of characters allowed for the parameter is displayed.
Recommended
Response Action
Reduce the number of characters to the maximum length allowed for this
parameter.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LC065
Message The iDRAC static IP address information is not fully configured. The missing
attribute InstanceID is arg1 .
Arguments arg1 = attribute key
Detailed
Description
The static IPv4 information for the iDRAC represented by the related iDRACCard
Attributes must be configured correctly.
Recommended
Response Action
Configure the iDRAC static IP address information by setting the related iDRACCard
Attributes. The related attributes that must be configured are the following:: 1) In
the IPv4 group: Address, NetMask, Gateway, DNS1 2) In the NIC Static group:
DNSDomainName.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LC066
Message The Export Certificate operation is currently running.
Detailed
Description
The Export Certificate operation is already running and may take a few minutes to
complete.
Recommended
Response Action
Wait until the current operation is complete and then retry the operation.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LC067
Message Successfully exported SSL Certificate.
718