Reference Guide

Severity Severity 3 (Informational)
No alerts are applicable for this message
LC035
Message As-Shipped Hardware Inventory Export method is not supported.
Detailed
Description
This method is not supported in this version of Firmware.
Recommended
Response Action
Update the iDRAC firmware to a version that supports this method.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 3 (Informational)
No alerts are applicable for this message
LC036
Message Lifecycle Controller is not enabled.
Detailed
Description
The Lifecycle Controller has been disabled through the iDRAC configuration utility
accessed by pressing CTRL+E on boot up or through a remote command.
Recommended
Response Action
Use the iDRAC configuration utility to enable the Lifecycle Controller by pressing
on the CTRL+E option on boot up at the targeted system.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 3 (Informational)
No alerts are applicable for this message
LC037
Message An instance of Lifecycle Controller Log Export is already running.
Detailed
Description
Lifecycle Controller is locked by another instance of Lifecycle Controller Log
Export operation. Wait for that operation to complete before attempting to run
another command.
Recommended
Response Action
Do one of the following: 1) Wait approximately 2 minutes and retry the operation.
2) Reset iDRAC and retry the operation.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
No alerts are applicable for this message
709