Reference Guide

Detailed
Description
The communications encryption certificate was imported successfully.
Recommended
Response Action
No response action is required.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 3 (Informational)
No alerts are applicable for this message
LC0100
Message Lifecycle Controller has entered Recovery mode.
Detailed
Description
A persistent error has occurred while carrying out a Lifecycle Controller operation.
This situation causes Lifecycle Controller to enter Recovery mode. Any remote jobs
pending execution were cancelled.
Recommended
Response Action
To verify or change Recovery mode, use F2 Setup, select iDRAC Configuration, and
select Lifecycle Controller Settings. Updating Lifecycle Controller clears the
Recovery mode.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LC0101
Message Lifecycle Controller action was cancelled by a user.
Detailed
Description
A user cancelled Lifecycle Controller actions. Any remote jobs pending execution
were cancelled.
Recommended
Response Action
No response action is required.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 3 (Informational)
No alerts are applicable for this message
LC011
Message Certificate import operation failed.
Detailed
Description
There was a general failure in the certificate import process.
Recommended
Response Action
Try one of the following: 1) Rerun the command. 2) Reset iDRAC and run the
command.
701