Reference Guide

29
LC Event Messages
LC001
Message Command successful.
Detailed
Description
The command completed successfully.
Recommended
Response Action
No response action is required.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 3 (Informational)
No alerts are applicable for this message
LC002
Message General failure.
Detailed
Description
A general failure occurred while executing the command.
Recommended
Response Action
Verify network connectivity. If failure persists, reset the iDRAC to resolve the issue.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 1 (Critical)
No alerts are applicable for this message
LC003
Message Failed to change the firmware update mode.
Detailed
Description
An error occurred while trying to set the firmware update mode.
Recommended
Response Action
Verify that the firmware version supports this mode. Also confirm that the
command and parameters are correct. The parameter choices are: 1) Disable
(default) 2) Allow version upgrade only 3) Match firmware of replaced part.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
698