Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
JCP030
Message Unable to schedule jobs while an iDRAC firmware update or configuration job is
running.
Detailed
Description
Unable to schedule jobs for execution while an iDRAC firmware update job is
running.
Recommended
Response Action
Wait for the running job to complete, and then retry the operation.
Category Configuration (JCP = Job Control)
Severity Severity 3 (Informational)
No alerts are applicable for this message
JCP031
Message Unable to delete the job because the configuration is still being committed.
Detailed
Description
The job ID specified as input to the operation has configuration data that is
currently being processed by the iDRAC. The job can be deleted after the
processing is done.
Recommended
Response Action
Retry the operation. If the issue persists, reset the iDRAC by pressing the System ID
button for 15 seconds, wait for the iDRAC to finish restarting, and then retry the
operation.
Category Configuration (JCP = Job Control)
Severity Severity 3 (Informational)
No alerts are applicable for this message
JCP032
Message Unable to create a job because conflicting options are entered.
Detailed
Description
The configuration job cannot be created because the -r and --realtime options
cannot be used at the same time.
696