Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 8.2
681682683684685686687688689690
Table Of Contents
Category Audit (ISM = iDRAC Service Module)
Severity Severity 2 (Warning)
No alerts are applicable for this message
ISM0023
Message The feature WMI Information is de-activated because the iDRAC firmware version
installed is not compatible. It will be activated when the compatible iDRAC
firmware is installed.
Detailed
Description
The feature WMI Information is disabled. It will be enabled when a compatible
iDRAC firmware is installed.
Recommended
Response Action
WMI Information feature requires iDRAC 8 firmware version 2.00.00 or later.
Update the iDRAC firmware to the appropriate version to activate the WMI
Information feature.
Category Audit (ISM = iDRAC Service Module)
Severity Severity 3 (Informational)
No alerts are applicable for this message
684