Reference Guide

operation is done only for the first run of iDRAC Service Module. If OS to iDRAC
Pass-through is disabled after this point of time, iDRAC Service Module will not be
able to connect to iDRAC until user enables the OS-iDRAC Pass-through in the
USB mode.
Recommended
Response Action
No response action is required.
Category Audit (ISM = iDRAC Service Module)
Severity Severity 3 (Informational)
No alerts are applicable for this message
ISM0003
Message The iDRAC Service Module is unable to discover iDRAC from the operating system
of the server.
Detailed
Description
The iDRAC Service Module could not successfully discover iDRAC from the server
OS. However, the iDRAC Service Module will continue the discovery operation.
Make sure that the IPMI drivers are enabled on the server operating system.
Recommended
Response Action
No response action is required.
Category Audit (ISM = iDRAC Service Module)
Severity Severity 3 (Informational)
No alerts are applicable for this message
ISM0004
Message The iDRAC Service Module has successfully started communication with iDRAC.
Detailed
Description
The iDRAC Service Module has successfully started communication with iDRAC.
Recommended
Response Action
No response action is required.
Category Audit (ISM = iDRAC Service Module)
Severity Severity 3 (Informational)
No alerts are applicable for this message
ISM0005
Message The iDRAC Service Module has successfully restarted communication with iDRAC.
Detailed
Description
The iDRAC Service Module has successfully restarted communication with iDRAC.
677