Reference Guide

IOV1007
Message Unable to assign a PCIe slot.
Detailed
Description
The IOV slot management subsystem detected an error which may prevent the
physical assignment/unassignment or turning off of a PCIe slot. The errors can be
caused by PCIe training timeouts, false hot plug signals,or installation of an
unsupported PCIe adapter card. For a list of supported PCIe adapter cards contact
your service provider.
Recommended
Response Action
Insert only supported adaptor cards into system PCIe slots and make sure they are
fully inserted. Retry the operation.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
No alerts are applicable for this message
IOV1008
Message Invalid Virtual Adapter FQDD arg1 .
Arguments arg1 = FQDD value
Detailed
Description
The FQDD (Fully Qualified Device Descriptor) value entered for the operation does
not map to any DCIM_ChassisVAView class instance representing Virtual Adapters.
Recommended
Response Action
Perform an Enumerate operation on the DCIM_ChassisVAView class to get the
correct FQDD for the Virtual Adapter. Retry the operation with the correct FQDD
value.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
No alerts are applicable for this message
IOV1009
Message Mismatch in Slot or Virtual Adapter FQDD and Server Slot FQDD count.
Detailed
Description
The FQDD pairs identified in the messages do not match in the required method
input parameters.
Recommended
Response Action
Provide a valid pair of FQDDs. Please refer to the DCIM Chassis PCI Management
Profile document for the required parameter definitions.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
No alerts are applicable for this message
658