Reference Guide

No alerts are applicable for this message
IOV1004
Message Too many slots provided as parameters to Assign and UnAssign Servers methods.
Detailed
Description
The parameters for the method identified in the message are not passed correctly.
Recommended
Response Action
Refer to the DCIM Chassis PCI Management Profile document and provide the
required parameters.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
No alerts are applicable for this message
IOV1005
Message Invalid slot FQDD arg1 .
Arguments arg1 = FQDD value
Detailed
Description
The FQDD (Fully Qualified Device Descriptor) entered for the operation does not
map to any instance of the DCIM_ChassisPCISlot class.
Recommended
Response Action
Perform the Enumerate operation on the DCIM_ChassisPCISlot class to determine
the correct FQDD value for the required slot. Retry the operation with the correct
FQDD value.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
No alerts are applicable for this message
IOV1006
Message Invalid PCI slot or Server slot.
Detailed
Description
The PCI slot or Server slot FQDD (Fully Qualified Device Descriptor) values entered
for the operation are not valid.
Recommended
Response Action
Perform the Enumerate operation on the DCIM_ChassisPCISlot class and
DCIM_BladeServerView class to get the correct FQDD values for the PCIe slot and
Server slot. Retry the operation with the correct FQDD values.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
No alerts are applicable for this message
657