Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
IOV002
Message Unable to create or allocate the required resources.
Detailed
Description
CMC could not successfully allocate resources because of the following reasons: 1)
The chassis manager is unable to allocate required resources. 2) The chassis
manager or chassis infrastructure firmware is rolled back to an earlier version. 3)
There is an issue with the internal communications between chassis components.
Recommended
Response Action
Make sure the firmware for the various chassis components are compatible with
each other. If this is the case, do the following: 1) Turn off the chassis, by pressing
the chassis Power Button, 2) run the following CMC RACADM command "racadm
racresetcfg". If the problem persists, contact your technical service provider.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
IOV003
Message Unable to manage the device located in the PCIe slot specified in the operation.
Detailed
Description
A PCIe device error was detected that does not allow the assignment,
unassignment, or the turning off of the device. The errors can be caused by
incorrect PCIe device installation or installation of an unsupported PCIe adapter
card. For a list of supported PCIe adapter cards contact your service provider.
Recommended
Response Action
Make sure that supported adapters are used and installed correctly in the PCIe
slots.
Category Configuration (IOV = IO Virtualization)
Severity Severity 2 (Warning)
648