Reference Guide

Recommended
Response Action
Remove and reapply chassis input power. If problem persists, contact your service
provider.
Category System Health (HWC = Hardware Config)
Severity Severity 1 (Critical)
Trap/EventID 2329
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔* ✔*
HWC8507
Message The USB device inserted in to the I/O Panel USB port is causing an issue and
cannot be used.
Detailed
Description
The USB device inserted in to the I/O Panel USB port is causing an issue and
cannot be used. The USB device may not be operational.
Recommended
Response Action
Remove the USB device from the I/O Panel USB port, and then retry the operation
with another USB device.
Category System Health (HWC = Hardware Config)
Severity Severity 2 (Warning)
Trap/EventID 2330
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔* ✔*
HWC8508
Message A device causing an issue in the I/O panel USB port is removed.
634