Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔ ✔*
CMC
HWC8009
Message SD card device sensor value unknown. SD card location: arg1 , SD card device type:
arg2 , SD card state: arg3 .
Arguments arg1 = location, arg2 = type, arg3 = state
Detailed
Description
An SD card device sensor in the identified system could not obtain a reading.
Recommended
Response Action
Remove and reinsert the identified SD card.
Category System Health (HWC = Hardware Config)
Severity Severity 3 (Informational)
OMSA Event ID 5751
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔ ✔*
CMC
HWC8501
Message Unable to complete the operation because of an issue with the I/O panel cable.
Detailed
Description
The operation could not successfully completed because of an issue with the I/O
panel cable.
Recommended
Response Action
Do one of the following and retry the operation: 1) Connect the I/O panel cable
properly 2) Replace the I/O panel cable.
Category System Health (HWC = Hardware Config)
Severity Severity 1 (Critical)
Trap/EventID 2329
631