Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔*
FAN1002
Message arg1 has failed.
Arguments arg1 = Fan Sensor Name
Detailed
Description
The enclosure detected that a fan has failed and the enclosure is no longer
functioning in optimal condition..
Recommended
Response Action
Contact technical support.
Category Storage (FAN = Fan Event)
Severity Severity 1 (Critical)
Trap/EventID 4201
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔*
FAN8500
Message Enhanced Cooling Mode is Enabled
Detailed
Description
Enabling Enhanced Cooling Mode will provide increased airflow capability to the
blades by increasing the maximum allowable blower speed at the cost of increased
power consumption.
Recommended
Response Action
No response action is required.
Category Audit (FAN = Fan Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
520