Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔* ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔ ✔*
CMC
FAN0025
Message The arg1 sensor state has changed to a warning state with a value of arg2 RPM.
Arguments arg1 = sensor name, arg2 = fan speed
Detailed
Description
The fan identified in the message is not functioning correctly. The fan may be
installed incorrectly or may be failing.
Recommended
Response Action
Remove and re-install the fan, or replace the fan. If the issue persists, contact your
service provider.
Category System Health (FAN = Fan Event)
Severity Severity 2 (Warning)
OMSA Event ID 5103
OMSA Trap ID 5103
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔* ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔ ✔*
CMC
FAN0026
Message The arg1 sensor detected an error with a value of arg2 RPM.
Arguments arg1 = sensor name, arg2 = fan speed
Detailed
Description
The fan sensor identified in the message indicates that the related fan has
exceeded critical RPM thresholds..
517