Reference Guide

Recommended
Response Action
Re-install the fan, and open the OMSA Web interface to verify if the fan identified in
the message is displayed correctly. If the issue persists, contact your service
provider.
Category System Health (FAN = Fan Event)
Severity Severity 3 (Informational)
OMSA Event ID 5303
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔ ✔*
CMC
FAN0022
Message The arg1 sensor has failed, and the last recorded value by the sensor was arg2 RPM.
Arguments arg1 = sensor name, arg2 = fan speed
Detailed
Description
The sensor identified in the message has failed. The sensor may be required for
optimal system performance.
Recommended
Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If the fan sensor has failed, replace the system board. For more information,
contact your service provider.
Category System Health (FAN = Fan Event)
Severity Severity 1 (Critical)
OMSA Event ID 5100
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔ ✔*
CMC
515