Reference Guide

17
EPP Event Messages
EPP001
Message Unable to use the Extended Power Performance (EPP) feature on chassis.
Detailed
Description
The Extended Power Performance cannot be used unless chassis has six EPP
capable PSUs, Configure the Power Redundancy Policy to Grid Redundancy &
MPCM, DPSE, SBPM and Fresh Air features should be disabled.
Recommended
Response Action
Make sure that chassis has six EPP capable PSUs, Configure the Power Redundancy
Policy to Grid Redundancy & MPCM, DPSE, SBPM and Fresh Air features should be
disabled. Then enable the EPP feature.
Category System Health (EPP = Extended Power Performance)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
EPP002
Message Unable to use the Extended Power Performance (EPP) feature because the
Maximum Power Conservation Mode is enabled.
Detailed
Description
The Extended Power Performance cannot be used because the Maximum Power
Conservation Mode is enabled.
Recommended
Response Action
Disable the Maximum Power Conservation Mode and then retry to enable the EPP
feature.
Category System Health (EPP = Extended Power Performance)
Severity Severity 2 (Warning)
494