Reference Guide

Arguments arg1 = Enclosure Name
Detailed
Description
The physical disk enclosure is either hotter or cooler than the maximum or
minimum allowable temperature range.
Recommended
Response Action
Check for factors that may cause overheating or excessive cooling. For example,
verify that the enclosure fan is working. You should also check the thermostat
settings and examine whether the enclosure is located near a heat source. Make
sure the enclosure has enough ventilation and that the room temperature is not
too hot or too cold. Refer to the enclosure documentation for more diagnostic
information.
Category Storage (ENC = Storage Enclosr)
Severity Severity 1 (Critical)
Trap/EventID 4337
OMSA Event ID 2112
OMSA Trap ID 85400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔
ENC30
Message arg1 firmware download is in-progress.
Arguments arg1 = Enclosure Name
Detailed
Description
This alert is provided for informational purposes.
Recommended
Response Action
No response action is required.
Category Storage (ENC = Storage Enclosr)
Severity Severity 3 (Informational)
Trap/EventID 4339
OMSA Event ID 2354
OMSA Trap ID 85100
486