Reference Guide

DIS103
Message The AutoConfig operation is unable to access a network share folder, because
incorrect credentials are specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
The network share folder cannot be accessed by using the credentials specified in
the DHCP scope option field where the VendorID=iDRAC.
Recommended
Response Action
Verify whether or not the following are correctly entered in the DHCP scope
option field where the VendorID=iDRAC, and then retry the operation: 1) Network
share name. 2) The IP address of the network share folder. 3) The username and
password (-u <username> & -p <password>)
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
DIS104
Message The AutoConfig operation is unable to access the network share folder, because an
invalid filename is specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
The AutoConfig operation is unable to access the network share folder, because an
invalid filename is specified in the DHCP scope option field where the
VendorID=iDRAC.
Recommended
Response Action
Specify a valid file name in the DHCP scope option field where the
VendorID=iDRAC using the (-f <filename>).
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
464