Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
DIS009
Message Notification of iDRAC IP address changed to arg1 sent to Provisioning Server.
Arguments arg1 = new IP address
Detailed
Description
iDRAC IP address sent to Provisioning Server.
Recommended
Response Action
No response action is required.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
DIS010
Message Auto Discovery LCD display message: arg1
Arguments arg1 = progress message
Detailed
Description
The Auto Discovery process has encountered a problem. One of the following
messages will be displayed on the LCD display and entered in the LC log: 1) No
credentials returned, 2) Blocked Because Admin Account Enabled, 3) Blocked
Because IPv6 Enabled, 4) No IP on NIC, 5) No provisioning server found, 6)
Provisioning server is unreachable/invalid address, 7) SSL connection failed no
service at IP/port, 8) SSL connection refused, 9) SSL connection failed (Server
authentication), 10) SSL connection failed (client authentication), 11) SSL
connection failed other, 12) SOAP failure, 13) Failed to create account, 14) Blocked
Because Active Directory Enabled, 15) No Service Tag, and 16) Unknown.
Recommended
Response Action
Refer to Lifecycle Controller Remote Services Users Guide for additional
information for LCD messages.
458