Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
DIAG8611
Message User reported not hearing speaker tone
Detailed
Description
Recommended
Response Action
If the beep was not heard, verify the internal speakers are connected properly. On
some systems, internal speakers are a purchased option. For a given system, if the
speaker is optional, it might not exist on that system. If audio is not heard, make
sure to unplug anything plugged into an external headphone jack and rerun the
test. External HP jacks can mute the internal speakers at the hardware level.
Category System Health (DIAG = Diagnostic)
Severity Severity 3 (Informational)
No alerts are applicable for this message
453