Reference Guide

Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
DIAG8157
Message arg1 Drive arg2 - S/N arg3 , drive is not a supported drive.
Arguments arg1 = Tape|Disk, arg2 = Drive Location, arg3 = Serial Number
Detailed
Description
If <Tape> then only Dell tape drives are tested and supported. If <Disk> then disk
drive may not be a Dell drive.
Recommended
Response Action
Customer appears to have added a non-Dell Tape drive to his system.
Category Storage (DIAG = Diagnostic)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
DIAG8158
Message arg1 Drive arg2 - S/N arg3 , incorrect status = arg4 \n arg5 .
Arguments arg1 = Backplane|Expander|RD1000, arg2 = Drive Location, arg3 = Serial Number,
arg4 = 80000000000000??, arg5 = Error Reason
Detailed
Description
A device failed a command and testing cannot complete.
449