Reference Guide

DIAG8020
Message Low memory. arg1 k bytes free!
Arguments arg1 = Decimal
Detailed
Description
Recommended
Response Action
Software error, should not normally occur in field.
Category System Health (DIAG = Diagnostic)
Severity Severity 3 (Informational)
No alerts are applicable for this message
DIAG8021
Message SMBIOS DIMM configuration did not match.
Detailed
Description
Recommended
Response Action
Software error, should not normally occur in field.
Category System Health (DIAG = Diagnostic)
Severity Severity 2 (Warning)
No alerts are applicable for this message
DIAG8154
Message Tape Drive arg1 - S/N arg2 , ULTRIUM arg3 media found but drive requires
ULTRIUM arg4 for arg5 .
Arguments arg1 = Drive Location, arg2 = Serial Number, arg3 = Generation, arg4 =
Generation, arg5 = writes
Detailed
Description
Each generation of ULTRIUM Tape drives usually supports the previous generation
but not newer generation tape media.
Recommended
Response Action
Install the correct tape media.
Category Storage (DIAG = Diagnostic)
Severity Severity 3 (Informational)
447